isometric isometric title scale date dr dwg rev the information contained in this document is proprietary to e-switch and is not to be copied or transferred sheet of rev pcr no description date by 3004p1j3blkm2qe 2:1 1/12/2006 T346017 a ph 1 1 pos. 1pos. 2pos. 3 switch function none on on 2-3, 5-6, 8-9, 11-2 n/a 2-1, 5-4, 8-7, 11-10 p.c. mounting a 15675 released for production 1/12/06 ph note: 1. all dimensions in mm [inch] 2. general tolerance: x.x=0.4 x.xx=0.25 3. terminal numbers for ref only 4. plating material:silver 5. rating: 2a @ 250vac 5a @ 120vac or 28vdc 6. electric life: 40,000 make-and-break cycles at full load. 7. insulation resistance: 1,000 mega-ohm min. 8. dielectric strength: 1,000 v rms @sea level. 9. operating temp.: -30c to 85c 10. denotes critical parameter. 11. 2002/95/ec (rohs) compliant e-switch marking on opposite side 10 11 12 12 9 4.70 [.185 in] 6 3 4.83 [.190 in] n 1.85 [.073 in] 21.59 [.850 in] 12.70 [.500 in] 15.11 [.595 in] 26.80 [1.055 in] 23.01 [.906 in] 8.92 [.351 in] 8.13 [.320 in] 10.54 [.415 in] 4.70 [.185 in] 4.70 [.185 in] .76 [.030 in] 4.83 [.190 in] 1.27 [.050 in] 6.35 [.250 in] 4pdt 2 way circuit note: jumper pin 3 to 5, 9 to 11 12 11 10 9 8 7 6 5 4 3 2 1 pos. 1 pos. 3 9 8 7 3 2 1 12 11 10 6 5 4 (in) (in) (in) (in) (out) (out) (out) (out) epoxy seal
|
